✨ How to Apply Your Waterproof Sticker

For best results on coated steel cups (like Stanley or Owala):

1. Clean the surface
   Wash with soap and water.
   Wipe dry, then wipe again with rubbing alcohol to remove any oils.
   Make sure the surface is completely dry before applying.
   
2. Peel carefully
   Slowly peel the sticker from the backing, avoiding touching the adhesive with your fingers.
   
3. Position & press
   Place the sticker in your desired spot.
   Press from the center outward, smoothing firmly to remove air bubbles.
   Pay extra attention to edges—rub them down well so they seal tightly.
4. Let it cure
   Allow the sticker to set for 24 hours before washing or heavy use.
   This gives the adhesive time to bond fully.
5. Care tips
   Hand-wash only — no dishwasher.
   Avoid scrubbing directly on the sticker edges.
   If you ever see an edge lifting, press it back down firmly while dry.
   ✅ Pro tip: Applying stickers at room temperature (not to a cold or sweaty cup) helps them stick better and last longer.